From Bridge Tooling to Volume Production — One Toolroom
Early samples, bridge tooling and volume runs usually get split across three different suppliers. At Hongqiang they stay under one roof. The toolroom that cuts your first bridge tool is the same one that runs it later on the floor, across 11 injection presses from 80 to 450 T, supported by 5 CNC machines plus EDM, wire cutting and grinding in-house. Nothing gets re-quoted or re-tooled somewhere else when your part moves from first shots to repeatable production.
- Bridge tooling built in the same toolroom that will later run production
- 11 presses (80–450 T) covering pilot samples through volume runs
- 5 CNC plus EDM, wire cutting and grinding kept in-house
- Every tool qualified in our own CMM inspection room before it leaves
Send your 2D/3D drawings and we return a quote within 24 hours. Lead times and volumes are confirmed per project after DFM.
Precision Injection Molds, Quoted in 24 Hours
11 presses (80–450 T), 5 CNC and a full in-house toolroom with CMM inspection. Send your drawing — we return a like-for-like quote the same business day.
Parts We Mold
A sample of enclosures, housings and structural parts moulded at H&Q – from single parts to multi-cavity family moulds in PP, PE, ABS, PC, PA and more.
What We Do
Injection Moulds
Single-cavity and multi-cavity injection moulds for automotive parts, medical devices, home appliances and consumer electronics – built from your 2D/3D drawings and standards. See the tool types we build.
Injection Molding
Production moulding with insert and overmolding options, secondary finishing and part inspection before shipment.
Engineering Support
DFM feedback, moldflow analysis and material selection guidance so your RFQ turns into a buildable, cost-efficient tool.
Inside Our Factory
Toolmaking & molding plant
Design, toolmaking, injection molding and assembly run under one roof.
Injection molding shop – 80–450 T
Injection presses from 80 to 450 tons run with take-out robots, keeping molding capacity in-house.
CNC machining
5 CNC machines mill cores, cavities and plates straight from the 3D model.
EDM (spark erosion)
Spark erosion cuts sharp details and deep ribs in hardened steel.
Metrology room – CMM
The bridge CMM verifies mould and part dimensions against the 3D model.
Multi-cavity mould
A multi-cavity plate assembled and checked before mould trials.
How we compare with typical US/EU tooling suppliers
Cost and lead-time figures below are industry-typical. Your actual saving is confirmed per project after DFM.
| Hongqiang Mould | Typical US/EU tooling suppliers | |
|---|---|---|
| Quote turnaround | Within 24 hours of your 2D/3D drawings | Often several business days |
| Production chain | 11 presses (80–450 T) + 5 CNC + EDM, wire-cut, grinding, fitting + CMM — full in-house toolmaking | Often outsources part of the process |
| Communication | Direct WhatsApp / email to engineers | Time zones + multiple subcontracting layers |
| Pricing | Quoted per project — send your local quote and we benchmark like-for-like (same steel, same cavity spec) | Local premium rates |
| Inspection | Every mould through the CMM room | Varies by supplier |
Frequently asked questions
How fast can I get a quote?
Within 24 hours after we receive your 2D/3D drawings.
Do you make molds in-house?
Yes. 11 injection presses (80–450 T), 5 CNC machines plus EDM, wire-cut EDM, grinding and fitting, and a CMM inspection room. Full toolmaking is done in-house.
How do you control mold quality?
Every mold goes through our CMM inspection room, and toolmaking (CNC, EDM, wire-cut, grinding) is done in-house so tolerances stay under our control.
Ready to start your tooling project?
Send drawings (2D/3D) and requirements – quote within 24 hours.